Detailed Product Description

A detector (radio emitter) can automatically match codes with the alarm
host, whose expansibility is simple and fast. And the menu operation is
very simple and easy to use. There are 100 independent defense areas
and the defense state of each area can be activated and deactivated independently.


Besides, the common defense area and emergent defense area can be defined
at will. The alarm host has two sets of timing switch on/off times and
also has current on/off status indication.

There are three kinds of optional alarm sounds and four levels of
optional alarm volumes. Additionally, ten pieces of up-to-date alarm
messages can scroll to display simultaneously and 60 latest alarm
messages can be inquired. Optional built-in emergency power supply is
provided as well as the floating charge device and low voltage alarm
function.

In addition, it provides a set of normal open, a set of normal close
alarm output +12V DC output, which can be used for linkage alarms. Additionally,
the optional self-propelled clock module can still work
normally even if the alarm host is power off.

The system can work together with such wireless detectors as KS-200AT,
KS-200ACT, KS-200AT I, KS-200BCT, KS-200BT I and etc and KS-50 series
wireless emitter.

Features:
1) Working voltage: AC 220V ± 15%, DC 9.6V - 14V
2) Standby current: <=70mA
3) Wireless receiving sensitivity: better than 0.2μV
(12dB signal-to-noise ratio)
4) Champaign wireless receiving distance: 3-10 Km
5) Alarm loudness: >=100dB within 1m